Boston Python Workshop 3/Friday/Linux project dependencies

From OpenHatch wiki
Revision as of 13:12, 24 September 2011 by imported>Jesstess (Protected "Boston Python Workshop 3/Friday/Linux project dependencies" ([edit=autoconfirmed] (indefinite) [move=autoconfirmed] (indefinite)))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

ColorWall

Download the ColorWall project

You'll be writing graphical effects for an existing ColorWall project. Download this ColorWall code and example effects so you're ready to start working with them tomorrow:

  1. Create a new folder called ColorWall on your Desktop
  2. Save the following files to the ColorWall folder:

Test the ColorWall code

Start a command prompt and navigate to the Desktop/ColorWall directory where the ColorWall code lives. For example, if the ColorWall project is at /home/jesstess/Desktop/ColorWall,

cd /home/jesstess/Desktop/ColorWall

will change you into that directory, and

ls

will show you the source code files in that directory. One of the files is "run.py", which has a ".py" extension indicating that it is a Python script. Type:

python run.py

at the command prompt to execute the run.py Python script. You should see a window pop up and start cycling through colorful effects. If you don't, let a staff member know.

Now type:

python run.py -a -s

at the command prompt to execute the run.py Python script so that it runs only the advanced effects. You should see a window pop up and start cycling through different colorful effects. If you don't, let a staff member know.

You can also run both sets of effects by typing:

python run.py -a

Success!

You've completed setup for the ColorWall project.

Wordplay

Download the Wordplay project

We've written some skeleton code for the Wordplay project already. Download this code so you're ready to start working with it tomorrow:

  1. Create a new folder called Wordplay on your Desktop
  2. Save the following files to the Wordplay folder:
    1. http://mit.edu/jesstess/www/BostonPythonWorkshop3/Wordplay/sowpods.txt
    2. http://mit.edu/jesstess/www/BostonPythonWorkshop3/Wordplay/scrabble.py
    3. http://mit.edu/jesstess/www/BostonPythonWorkshop3/Wordplay/scrabble_cheater.py
    4. http://mit.edu/jesstess/www/BostonPythonWorkshop3/Wordplay/words1.py
    5. http://mit.edu/jesstess/www/BostonPythonWorkshop3/Wordplay/words2.py
    6. http://mit.edu/jesstess/www/BostonPythonWorkshop3/Wordplay/words3.py
    7. http://mit.edu/jesstess/www/BostonPythonWorkshop3/Wordplay/words4.py
    8. http://mit.edu/jesstess/www/BostonPythonWorkshop3/Wordplay/words5.py
    9. http://mit.edu/jesstess/www/BostonPythonWorkshop3/Wordplay/words6.py

Test the Wordplay code

Start a command prompt and navigate to the Desktop/Wordplay directory where the Wordplay code lives. For example, if the Wordplay project is at /home/jesstess/Desktop/Wordplay,

cd /home/jesstess/Desktop/Wordplay

will change you into that directory, and

ls

will show you the source code files in that directory. One of the files is "words1.py", which has a ".py" extension indicating that it is a Python script. Type:

python words1.py

at the command prompt to execute the words1.py Python script. You should see a column of English words printed to the screen. If you don't, let a staff member know.

Success!

You've completed setup for the Wordplay project.

Twitter

Download and extract the Twitter project dependencies

  1. Click and save these four dependencies to your Desktop:
  2. The ".zip" extension on the above files indicates that they are compressed Zip archives. We need to "extract" their contents. To do this, double-click on each file. This will create a directory for each file, containing the source code for the dependency.

Install the Twitter project dependencies

Each of these 4 dependencies has an installer script that we'll need to run at a command prompt to install the software. It is important that the dependencies are installed in the order listed above. For each project, start a command prompt and navigate to the Desktop directory where the source code lives. For example, if the httplib2-0.6.0 project was extracted to /home/jesstess/Desktop/Twitter/httplib2-0.6.0,

cd /home/jesstess/Desktop/Twitter/httplib2-0.6.0

will change you into that directory, and

ls

will show you the source code files in that directory. One of the files is "setup.py", which has a ".py" extension indicating that it is a Python script. Type:

sudo python setup.py install

type in your password, and hit enter to install httplib2.

Navigate to the 3 other dependency directories and run

sudo python setup.py install

in all of them to install those dependencies as well.

If you get an error like:

ImportError: No module named setuptools

you need an extra package. Type:

sudo apt-get install python-setuptools

We've written some skeleton code for the Twitter project already. Download this code so you're ready to start working with it tomorrow:

  1. Create a new folder called Twitter on your Desktop
  2. Save http://mit.edu/jesstess/www/BostonPythonWorkshop3/Twitter/twitter_api.py to the Twitter folder.
  3. Save http://mit.edu/jesstess/www/BostonPythonWorkshop3/Twitter/util.py to the Twitter folder.

Test the Twitter code

Start a command prompt and navigate to the Desktop/Twitter directory where the Twitter code lives. For example, if the Twitter project is at /home/jesstess/Desktop/Twitter,

cd /home/jesstess/Desktop/Twitter

will change you into that directory, and

ls

will show you the source code files in that directory. One of the files is "twitter_api.py", which has a ".py" extension indicating that it is a Python script. Type:

python twitter_api.py --search=python

at the command prompt to execute the twitter_api.py Python script. You should the text from 20 tweets containing the word "Python" printed to the screen. If you don't, let a staff member know.

Success!

You've completed setup for the Twitter project.

« Back to the Friday setup page